Used GEMCO Tumble Blenders: Double Cone, Slant Cone and V-Shape Buyer’s Guide

A GEMCO tumble blender mixes by rotating its vessel, so the material lifts, falls and folds over itself with no ribbons, plows or paddles pushing it around. The company builds three vessel shapes, the double cone, the slant cone and the V-shape, and builds each one to order. That means two used units with the same shape can be quite different, so it helps to know what to look for.

This guide explains the three shapes, the sizes and options you will run into, and what to confirm before you send a purchase request. For a general overview of the brand, including its vacuum dryers, see our GEMCO page. If you are comparing blender types, such as ribbon or plow blenders, start with our blenders page.

GEMCO Tumble Blender Shapes Compared

ShapeHow it blendsWhat to know
Double coneA symmetrical vessel moves particles freely without internal baffles.Low profile, so it needs less headroom. A single access cover makes cleaning and inspection simpler.
Slant coneAn asymmetrical vessel adds particle mobility and intermeshing.Keeps the low profile of the double cone. GEMCO cites blend times up to 33 percent shorter than other designs.
V-shapeTwo inclined cylinders repeatedly divide and recombine the material.Each cylinder has its own access cover for loading and cleaning. Popular across many industries.

GEMCO’s literature cites blend variation of 1 to 2 percent for the double cone and V-shape, and as low as one half of one percent for the slant cone. Treat those as manufacturer figures. Your own result depends on your materials, your fill level and your blend time.

Standard Sizes and Construction

GEMCO lists these standard features for its double cone and V-shape blenders:

  • Working capacity: 10 to 300 cubic feet, with smaller lab-scale units also built.
  • Vessel: 304 or 316 stainless steel.
  • Frame: carbon steel, with stainless steel available as an option.
  • Discharge: a butterfly valve.
  • Access: an 18-inch access cover.

Used units were built to the specification of the original buyer, so treat these as a baseline rather than a promise. Confirm the actual materials, valve and finish on the unit you are considering.

Sizing a Used Blender for Your Batch

Capacity is the most common point of confusion on a used listing. Ask whether a stated size is the vessel’s total internal volume or its working capacity. GEMCO generally recommends filling a blender to about half of its total internal volume, and its guidance shows the effective range is wider than that and varies by vessel shape and by whether an agitator is used.

Fill level is a measure of volume, not weight, so bulk density matters. A 1,000 pound batch of a powder that weighs 40 pounds per cubic foot takes up 25 cubic feet, which points you toward a vessel of roughly twice that size at a half-fill. Also keep in mind that cohesiveness, angle of repose and particle size distribution have the biggest effect on blend quality.

Options That Change a Used Blender’s Value

Options can matter as much as the vessel shape. These are the ones worth asking about:

  • High-shear or intensifier bars: an internal rotating bar that breaks up lumps, disperses fine additives such as colorants and adds liquids. GEMCO lists several types, including slow speed, high speed, liquid-solids, ultra-high speed, two-speed and variable-speed designs.
  • Airless spray system: offered on double cone and slant cone blenders for adding liquids.
  • Dust-tight discharge valve: a patented GEMCO valve, which helps when dust containment matters.
  • Discharge angle and valve size: different angles and sizes help poorly flowing or easily segregated materials leave the vessel cleanly.
  • GEMCOMATIC material handling: the drum loading and unloading system that many GEMCO blenders are paired with.
  • Finishes and enclosures: internal and external polishes, stainless steel frames and support enclosures.

A bar or spray system is usually easier to buy with the blender than to add afterward, so decide early whether your process needs one.

When a Tumble Blender Is and Is Not the Right Fit

Tumble blenders suit free-flowing powders and granules, including fragile or friable materials that would not hold up to a mechanical blade. They run on low horsepower and need little maintenance. Sticky, pasty or heavily cohesive materials are a different story, and a ribbon or plow blender may serve you better. You can compare those on our blenders page.

What to Confirm Before You Buy

We sell equipment as inspected and as-is, so the more detail you share, the better we can match you. These are the points that most often decide whether a used GEMCO blender fits.

  • Nameplate: model, serial number and year. A nameplate photo helps us identify the shape and size quickly.
  • Contact surfaces: confirm the vessel material and finish against your product and any sanitary or cleaning requirements.
  • Discharge valve: check the type, size and condition, and whether the seat and seals still close tightly.
  • Access covers: look at the gaskets and clamps on every cover.
  • Drive and frame: check the motor, gear reducer, speed control and the bearings that carry the vessel.
  • Bars and spray systems: if installed, confirm the drive, shaft seals and spray nozzles.
  • Electrical rating: make sure the motor and controls suit your area classification if you handle combustible dust or flammable materials.
  • Vessel interior: look for scratches, pitting, weld condition and product buildup.
  • Paperwork: ask for drawings, manuals or cleaning and validation records, if any are on file.

GEMCO Tumble Blender FAQs

What is the difference between a double cone, slant cone and V-shape blender?

The difference is the vessel geometry. The double cone is symmetrical, the slant cone is asymmetrical for faster blending, and the V-shape uses two inclined cylinders that split and recombine the material. All three are tumble blenders and share the same basic gravity-driven action.

How full should I fill a GEMCO tumble blender?

GEMCO generally recommends about half of the total internal volume. The workable range is wider, but it depends on the vessel shape and on whether an agitator bar is present, so check the manufacturer’s guidance for your model.

Do I need an intensifier bar?

It depends on your material. Free-flowing powders that blend easily often do not need one. If your material clumps, if you add liquids, or if a small amount of an additive must spread evenly, a bar is worth having.

Can a tumble blender handle sticky or wet materials?

Usually not well. Materials that stick to the vessel wall do not tumble freely, so a different blender type is normally a better match.

What should I send to get a quote?

Send the model and serial number if you have them, along with your material, batch size, bulk density, required vessel material and any options you need. A nameplate photo helps a lot.

Send Us Your Blender Requirements

Our team can help you find a used tumble blender that fits your batch size, your materials and your schedule. Browse the GEMCO units currently listed, search our full blender inventory, or submit a purchase request with your nameplate details. You can also use our contact form or call +1-866-289-5232.

New Liquidation • East Coast

New Liquidation • East Coast

New Liquidation from LCEC

Glass Lined Reactors, Glass Lined Vessels

Glass Lined Reactors, Glass Lined Vessels, and Stainless Steel Tanks.

Louisiana Chemical Equipment Company is the leader in used process equipment sales and complete industrial plants. LCEC has a new LIQUIDATION available, including: Glass Lined Reactors, Glass Lined Vessels, and Stainless Steel Tanks.

Louisiana Chemical Equipment Company
Real Experience, Real Solutions.
(225) 923-3602
sales@LCEC.com
plants@LCEC.com

Louisiana Chemical Equipment Company • Toll Free +1-866-289-5232 • International +1-281-471-4900
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

Louisiana Chemical Equipment Company, L.L.C.
offers an extensive range of quality chemical process equipment and Complete Chemical Plants with competitive pricing.

Louisiana chemical equipment company

REAL EXPERIENCE

REAL SOLUTIONS

Looking to upgrade your Ammonia Facility?

Looking to upgrade your Ammonia Facility?

Unused Kellogg Ammonia Equipment

Looking to upgrade your Ammonia Facility?

Upgrade your ammonia facility with our new Kellogg Ammonia Equipment, built specifically for an ammonia production plant.

The perfect equipment to have for your ammonia plant!

Unused Kellogg Ammonia Equipment Built for 1,500 TPD Kellogg Ammonia Plant.

Complete Compressor Train: Kellogg 101 100425 – 101J Air Compressor Mfg. Delaval Model 9CK37 100427 – 101J Air Compressor Mfg. Delaval Model 5CDK44 47,762 ACFM 100426 – 101JT Steam Turbine 16,929 HP/7,980 RPM Mfg. Delaval Model HJDF.

Complete Compressor Trains: Kellogg 105 95055 – 105J Ammonia Refrigeration 10,210 HP/7,250 RPM Mfg. Delaval Model 8CK44 14,010 ACFM 95056 – 105J Ammonia Refrigeration 3,075 HP/7,250 RPM Mfg. Delaval Model 7CL44 12,000 ACFM 95057 – 105JT Ammonia Refrigeration Steam Turbine 16,929 HP/7,300 RPM Mfg. Delaval Model HJ-DF-MV.

Louisiana Chemical Equipment Company • Toll Free +1-866-289-5232 • International +1-281-471-4900
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

Louisiana Chemical Equipment Company, L.L.C.
offers an extensive range of quality chemical process equipment and Complete Chemical Plants with competitive pricing.

Louisiana chemical equipment company

REAL EXPERIENCE

REAL SOLUTIONS

NEW LIQUIDATION • EAST COAST, USA

NEW LIQUIDATION • EAST COAST, USA

NEW LIQUIDATION • EAST COAST, USA

NEW LIQUIDATION • EAST COAST

At LCEC we buy and sell new and used process equipment and industrial plants. Our inventory includes used heat exchangers, tanks, pumps, columns, compressors, reactors/vessels, complete plants and much more. If you have any chemical equipment needs or have surplus equipment for sale, feel free to reach out.

This week LCEC has new Liquidations from East Coast, USA. Glass Lined Reactors, Glass Lined Vessels, & Stainless Steel Tanks are among our process equipment for Sale right now.

Liquidation

 

 

 

Liquidation

 

 

 

Liquidation

 

 

 

Liquidation

 

 

 

Liquidation

 

 

 

Louisiana Chemical Equipment Company • Toll Free +1-866-289-5232 • International +1-281-471-4900
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

Louisiana Chemical Equipment Company, L.L.C.
offers an extensive range of quality chemical process equipment and Complete Chemical Plants with competitive pricing.

Louisiana chemical equipment company

REAL EXPERIENCE

REAL SOLUTIONS

Unused Ultra-Low Nox Heatec heater and unused air fin coolers

Unused Ultra-Low Nox Heatec heater and unused air fin coolers

Unused Ultra-Low Nox vertical Natural Gas Fired Heater Package.

Unused 22MMBTU/HR Ultra-Low Nox Heatec Fired Heater and Unused Air Fin Coolers for Sale

Chemical Processing Equipment for Sale from LCEC.

Unused Ultra-Low Nox vertical Natural Gas Fired Heater Package. Heatec Model 16010-40. Coil Duty is 20,380,687 Btu/hr. Economizer Duty is 1,759,313 Btu/hr. The Heater Duty is 22,140,000 Btu/hr. The Required Burner Input (HHV) is 30,555,370 Btu/hr.

Louisiana Chemical Equipment Company, LLC
Real Experience, Real Solutions.
sales@LCEC.com • plants@LCEC.com

For more information
or to request a quote online click below.

Louisiana Chemical Equipment Company • Toll Free +1-866-289-5232 • International +1-281-471-4900
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

Louisiana Chemical Equipment Company, L.L.C.
offers an extensive range of quality chemical process equipment and Complete Chemical Plants with competitive pricing.

Louisiana chemical equipment company

REAL EXPERIENCE

REAL SOLUTIONS

214,000 LB/HR BOILER manufactured by Cleaver Brooks

214,000 LB/HR BOILER manufactured by Cleaver Brooks

214,000 LB/HR BOILER FOR SALE

214,000 LB/HR BOILER FOR SALE

Chemical Processing Equipment for Sale from LCEC.

Louisiana Chemical Equipment Company carries quality liquidation chemical equipment and complete plants. Currently available is this used boiler manufactured by Cleaver Brooks. This used water tube boiler capabilities include: 214,000 LBS/HR, 6294 HP, & 450 PSI.

LCEC’s Sales Team has extensive experience with used and unused chemical process equipment, surplus, & liquidations.

 

For more information
or to request a quote online click below.

Chemical Process Equipment

Louisiana Chemical Equipment Company • Toll Free +1-866-289-5232 • International +1-281-471-4900
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

Baton Rouge, LA

P.O. Box 65064, 70896
7911 Wrenwood, Ste. A
Baton Rouge, LA, 70809
Phone 225-923-3602
Fax: 225-926-5237

LaPorte, TX

P.O. Box 1490, 77572
11100 Hwy 225
La Porte, TX, 77571
Phone 281-471-4900
Fax 281-470-2968

Mexico

QUINTAS DEL SENDERO 120
COLONIA QUINTAS DE
ANAHUAC ESCOBEDO, NUEVO
LEON, MEXICO
C.P. 66059
Phone: 52-81-86612675
Fax: 52-81-86612223

Colombia

Cra.53#75-87
Oficina 3 -Office Center
BARRANQUILLA
Phone: 575-358-0478
Fax: 575-3603624
Cell: 57-3007070202
Email: colombiasales@lcec.com

Puerto Rico

PO Box 190725
San Juan
PR 00919-0725
Tel: 787-721-2477
Mob: 787-640-0353
Email: PuertoRicoSales@LCEC.com

United Kingdom

Orchard House
Low Worsall
North Yorkshire
TS15 9PJ
Tel: +44(0) 1642 789438
Cell: +44(0) 7960 922525

Get in contact with
Louisiana Chemical Equipment company

LCEC Storage Yard Locations:
Baton Rouge, LA • Orange, TX • Green Springs, Ohio • Williamsport, NJ • Enid, OKLaValle, Quebec, Canada • Liberty, SC • Belfast, Northern Ireland • Johannesburg, South Africa • Seoul, South Korea • Manchester, England • Priolo, Italy • Roven, FranceFrankfurt, Germany • Oulu, Finland • Perth, Australia

Louisiana Chemical Equipment Co., L.L.C. (LCEC’s) executive offices are located in Baton Rouge, LA and we have chemical processing equipment worldwide. From Complete Plants too Heat Exchangers and Centrifuges, we have you covered.

Our LaPorte, TX office host our sales team and one of our Chemical Plant equipment storage yard. We are positioned to help you find your chemical products, dismantle, and relocate anywhere. If you are a Plant owner, or  looking for chemical processing equipment contact our knowledgable and experienced staff today.

LCEC’s Home Facility in the Greater Baton Rouge Area • 7911 Wrenwood, Ste. A • Baton Rouge, LA, 70809 • Phone (225) 923-3602 • Fax: (225) 926-5237

LCEC in the Greater Houston Area • 11100 Hwy 225 • La Porte, TX, 77571 • Phone (281) 471-4900 • Fax (281) 470-2968

Used Heat Exchangers

Used Heat Exchangers

Used Heat Exchangers

Louisiana Chemical Equipment Company offers an extensive range of quality chemical process equipment and competitive pricing.

Used Heat Exchangers

Chemical Processing Equipment for Sale from LCEC.

Heat Exchangers for Sale. Louisiana Chemical Equipment Company carries industry standard Heat Exchangers for efficient performance and proven reliability. We have more than 1,000 used, new and surplus heat exchangers. Available this week, we recently acquired Unused Carbate Heat Exchangers.

 

For more information
or to request a quote online click below.

Chemical Process Equipment

Louisiana Chemical Equipment Company • Toll Free +1-866-289-5232 • International +1-281-471-4900
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

Baton Rouge, LA

P.O. Box 65064, 70896
7911 Wrenwood, Ste. A
Baton Rouge, LA, 70809
Phone 225-923-3602
Fax: 225-926-5237

LaPorte, TX

P.O. Box 1490, 77572
11100 Hwy 225
La Porte, TX, 77571
Phone 281-471-4900
Fax 281-470-2968

Mexico

QUINTAS DEL SENDERO 120
COLONIA QUINTAS DE
ANAHUAC ESCOBEDO, NUEVO
LEON, MEXICO
C.P. 66059
Phone: 52-81-86612675
Fax: 52-81-86612223

Colombia

Cra.53#75-87
Oficina 3 -Office Center
BARRANQUILLA
Phone: 575-358-0478
Fax: 575-3603624
Cell: 57-3007070202
Email: colombiasales@lcec.com

Puerto Rico

PO Box 190725
San Juan
PR 00919-0725
Tel: 787-721-2477
Mob: 787-640-0353
Email: PuertoRicoSales@LCEC.com

United Kingdom

Orchard House
Low Worsall
North Yorkshire
TS15 9PJ
Tel: +44(0) 1642 789438
Cell: +44(0) 7960 922525

Get in contact with
Louisiana Chemical Equipment company

LCEC Storage Yard Locations:
Baton Rouge, LA • Orange, TX • Green Springs, Ohio • Williamsport, NJ • Enid, OKLaValle, Quebec, Canada • Liberty, SC • Belfast, Northern Ireland • Johannesburg, South Africa • Seoul, South Korea • Manchester, England • Priolo, Italy • Roven, FranceFrankfurt, Germany • Oulu, Finland • Perth, Australia

Louisiana Chemical Equipment Co., L.L.C. (LCEC’s) executive offices are located in Baton Rouge, LA and we have chemical processing equipment worldwide. From Complete Plants too Heat Exchangers and Centrifuges, we have you covered.

Our LaPorte, TX office host our sales team and one of our Chemical Plant equipment storage yard. We are positioned to help you find your chemical products, dismantle, and relocate anywhere. If you are a Plant owner, or  looking for chemical processing equipment contact our knowledgable and experienced staff today.

LCEC’s Home Facility in the Greater Baton Rouge Area • 7911 Wrenwood, Ste. A • Baton Rouge, LA, 70809 • Phone (225) 923-3602 • Fax: (225) 926-5237

LCEC in the Greater Houston Area • 11100 Hwy 225 • La Porte, TX, 77571 • Phone (281) 471-4900 • Fax (281) 470-2968

100,000 Ton Stacker, Radial, Reclaimer • Schade Aumund

100,000 Ton Stacker, Radial, Reclaimer • Schade Aumund

LCEC • real experience, real solutions

100,000 Ton Stacker, Radial, Reclaimer • Schade Aumund

100,000 Ton Stacker, Radial, Reclaimer • Schade Aumund

LCEC delivers over 50 years of real experience and real solutions. From Heat Exchangers to Cooling Tower, we have you covered. Choose from our extensive online equipment inventory. New and used chemical process equipment and complete plants.

Our current specials include:
– Wet Sulfuric Acid (WSA) – 712 MTPD
– Selexol CO2 Removal, Qty 2 lines – 536 mm scfd each
– CO2 Dehydration, Qty 2 lines
– Nitrogen Production – 2.858,000 scf/hr
– Ammonia Loading System – 200,000 gallon capacity

Louisiana chemical equipment company

Real Experience, Real Solutions

LCEC’s personnel are qualified, experienced and eager to assist you.
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

We buy and sell Complete Chemical Plants and Process Equipment Worldwide. Louisiana Chemical Equipment Company has locations around the globe, which gives us the ability to acquire entire Complete Plants for relocation. If your looking for Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Complete Plant our sales team is here to help you.

Louisiana Chemical Equipment Company buys and sells complete chemical plants and process equipment on a worldwide. If you need Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Process Complete Plant, our team is here to help.

TRY OUR ADVANCED SEARCH FOR MORE DETAILS

FOLLOW US ONLINE

LOUISIANA CHEMICAL EQUIPMENT COMPANY
Real Experience, Real Solutions

+1-225-923-3602
sales@LCEC.com •
plants@LCEC.com

Agitators

Chemical Processing Equipment for Sale from LCEC.

Our agitators are machines that process product in the chemical, pharmaceutical, food and chemical plant industry. Agitators mix liquids together and promote reactions, including increasing heat transfer.

For more information
or to request a quote online click below.

Louisiana Chemical Equipment Company • Toll Free +1-866-289-5232 • International +1-281-471-4900
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

Baton Rouge, LA

P.O. Box 65064, 70896
7911 Wrenwood, Ste. A
Baton Rouge, LA, 70809
Phone 225-923-3602
Fax: 225-926-5237

LaPorte, TX

P.O. Box 1490, 77572
11100 Hwy 225
La Porte, TX, 77571
Phone 281-471-4900
Fax 281-470-2968

Mexico

QUINTAS DEL SENDERO 120
COLONIA QUINTAS DE
ANAHUAC ESCOBEDO, NUEVO
LEON, MEXICO
C.P. 66059
Phone: 52-81-86612675
Fax: 52-81-86612223

Colombia

Cra.53#75-87
Oficina 3 -Office Center
BARRANQUILLA
Phone: 575-358-0478
Fax: 575-3603624
Cell: 57-3007070202
Email: colombiasales@lcec.com

Puerto Rico

PO Box 190725
San Juan
PR 00919-0725
Tel: 787-721-2477
Mob: 787-640-0353
Email: PuertoRicoSales@LCEC.com

United Kingdom

Orchard House
Low Worsall
North Yorkshire
TS15 9PJ
Tel: +44(0) 1642 789438
Cell: +44(0) 7960 922525

LCEC’s Home Facility in the Greater Baton Rouge Area • 7911 Wrenwood, Ste. A • Baton Rouge, LA, 70809 • Phone (225) 923-3602 • Fax: (225) 926-5237

LCEC in the Greater Houston Area • 11100 Hwy 225 • La Porte, TX, 77571 • Phone (281) 471-4900 • Fax (281) 470-2968

Dismantled Nitric Acid Plant for Sale

Dismantled Nitric Acid Plant for Sale

LCEC • real experience, real solutions

Dismantled Nitric Acid Plant for Sale

This dismantled Nitric Acid Plant for sale by Louisiana Chemical Equipment Company is capable of producing 300 TPD. The equipment is stored at LCEC’s site in LaPorte, Texas. There is the technical documentation available including operating manuals, process descriptions, P&ID’s to re-rect this plant at another location. Additionally we have the dismantling and match marking package that was done.

Louisiana chemical equipment company

Real Experience, Real Solutions

LCEC’s personnel are qualified, experienced and eager to assist you.
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

We buy and sell Complete Chemical Plants and Process Equipment Worldwide. Louisiana Chemical Equipment Company has locations around the globe, which gives us the ability to acquire entire Complete Plants for relocation. If your looking for Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Complete Plant our sales team is here to help you.

Louisiana Chemical Equipment Company buys and sells complete chemical plants and process equipment on a worldwide. If you need Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Process Complete Plant, our team is here to help.

TRY OUR ADVANCED SEARCH FOR MORE DETAILS

FOLLOW US ONLINE

LOUISIANA CHEMICAL EQUIPMENT COMPANY
Real Experience, Real Solutions

+1-225-923-3602
sales@LCEC.com •
plants@LCEC.com

LCEC’s Home Facility in the Greater Baton Rouge Area • 7911 Wrenwood, Ste. A • Baton Rouge, LA, 70809 • Phone (225) 923-3602 • Fax: (225) 926-5237

LCEC in the Greater Houston Area • 11100 Hwy 225 • La Porte, TX, 77571 • Phone (281) 471-4900 • Fax (281) 470-2968

15.7 MMSCFD Syngas Plant

15.7 MMSCFD Syngas Plant

FEATURED COMPLETE CHEMICAL PLANTS

15.7 MMSCFD Syngas Plant for Sale

Syngas Plant for Sale from LCEC. This Hydro-Chem (now Linde) designed 15.7 MMSCFD (18,500 Nm3/hr) syngas reforming plant almost like new immediately available for purchase. The plant was built in 2016 and operated for only a few months. This plant was designed to use landfill gas and/or natural gas to produce synthesis gas, which is then converted into paraffinic naphtha, diesel and wax by Fischer-Tropsch process.

The syngas output flow rate is at 500°F and 175 psig. The syngas has the following composition (mol %): Hydrogen 43.01, Carbon Monoxide 16.37, Carbon Dioxide 8.34, Nitrogen 3.90, Methane 1.42, Argon 0.16, Water 26.79. Capacity may be varied from the control panel from 100% of design to 40% of design. The syngas can also be further processed depending on the desired final products such as ammonia and methanol.If potential client adds shift converter, PSA system, and an Amine System the assets could produce approximately 6-7 MMSCFD of pure Hydrogen.

Louisiana chemical equipment company

Real Experience, Real Solutions

LCEC’s personnel are qualified, experienced and eager to assist you.
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

We buy and sell Complete Chemical Plants and Process Equipment Worldwide. Louisiana Chemical Equipment Company has locations around the globe, which gives us the ability to acquire entire Complete Plants for relocation. If your looking for Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Complete Plant our sales team is here to help you.

Louisiana Chemical Equipment Company buys and sells complete chemical plants and process equipment on a worldwide. If you need Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Process Complete Plant, our team is here to help.

TRY OUR ADVANCED SEARCH FOR MORE DETAILS

FOLLOW US ONLINE

LOUISIANA CHEMICAL EQUIPMENT COMPANY
Real Experience, Real Solutions

+1-225-923-3602
sales@LCEC.com •
plants@LCEC.com

LCEC’s Home Facility in the Greater Baton Rouge Area • 7911 Wrenwood, Ste. A • Baton Rouge, LA, 70809 • Phone (225) 923-3602 • Fax: (225) 926-5237

LCEC in the Greater Houston Area • 11100 Hwy 225 • La Porte, TX, 77571 • Phone (281) 471-4900 • Fax (281) 470-2968

2,500 TPD Nitrogen Plant

2,500 TPD Nitrogen Plant

FEATURED COMPLETE CHEMICAL PLANTS

2,500 TPD Nitrogen Plant

For Sale from LCEC, a 2,500 TPD Nitrogen Plant manufactured by Air Liquide.

• 2,858,000 SCF/HR AT A PURITY OF 99.9% (0.1 & 02 maximum)

Louisiana chemical equipment company

Real Experience, Real Solutions

LCEC’s personnel are qualified, experienced and eager to assist you.
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

We buy and sell Complete Chemical Plants and Process Equipment Worldwide. Louisiana Chemical Equipment Company has locations around the globe, which gives us the ability to acquire entire Complete Plants for relocation. If your looking for Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Complete Plant our sales team is here to help you.

Louisiana Chemical Equipment Company buys and sells complete chemical plants and process equipment on a worldwide. If you need Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Process Complete Plant, our team is here to help.

TRY OUR ADVANCED SEARCH FOR MORE DETAILS

Baton Rouge, LA

P.O. Box 65064, 70896
7911 Wrenwood, Ste. A
Baton Rouge, LA, 70809
Phone (225) 923-3602
Fax: (225) 926-5237

LaPorte, TX

P.O. Box 1490, 77572
11100 Hwy 225
La Porte, TX, 77571
Phone (281) 471-4900
Fax (281) 470-2968

Mexico

QUINTAS DEL SENDERO 120
COLONIA QUINTAS DE
ANAHUAC ESCOBEDO, NUEVO
LEON, MEXICO
C.P. 66059
Phone: (52)(81)86612675
Fax: (52)(81)86612223

Colombia

Cra.53#75-87
Oficina 3 -Office Center
BARRANQUILLA
Phone: 575-3580478
Fax: 575-3603624
Cell: 57-3007070202
Email: colombiasales@lcec.com

Puerto Rico

PO Box 190725
San Juan
PR 00919-0725
Tel: 787-721-2477
Mob: 787-640-0353
Email: PuertoRicoSales@LCEC.com

United Kingdom

Orchard House
Low Worsall
North Yorkshire
TS15 9PJ
Tel: +44(0) 1642 789438
Cell: +44(0) 7960 922525

FOLLOW US ONLINE

LOUISIANA CHEMICAL EQUIPMENT COMPANY
Real Experience, Real Solutions

+1-225-923-3602
sales@LCEC.com •
plants@LCEC.com

LCEC’s Home Facility in the Greater Baton Rouge Area • 7911 Wrenwood, Ste. A • Baton Rouge, LA, 70809 • Phone (225) 923-3602 • Fax: (225) 926-5237

LCEC in the Greater Houston Area • 11100 Hwy 225 • La Porte, TX, 77571 • Phone (281) 471-4900 • Fax (281) 470-2968

Selexol CO2 Removal Plant

Selexol CO2 Removal Plant

FEATURED COMPLETE CHEMICAL PLANTS

Selexol CO2 Removal Plant

This Selexol CO2 Removal Plant is currently available from Louisiana Chemical Equipment Company. The Selexol Process is uses a physical solvent to remove acid gases from synthetic or natural gas streams. This process uses Dow Chemical’s Selexol solvent with a mixture of dimethyl ethers of polyethylene glycol. The solvent is chemically inert and not subject to degradation.

This process was introduced over 35 years ago and more than 60 Selexol units have been put into commercial service to date. The most recent applications focus on treating of synthetic gas from gasification complexes for power and hydrogen production. Three units have been in operation in this service since 2000 and have operated with high on stream efficiencies and better than design product qualities.

 

This unit can process about 536 MMSCFD of Syngas to remove CO2 from 22.37 Mole% down to ~0.5 <Mole% and 3130 PPM H2S down to <5 PPMV. Normal Operating Capacity ~509 MMSCFD.

Louisiana chemical equipment company

Real Experience, Real Solutions

LCEC’s personnel are qualified, experienced and eager to assist you.
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

We buy and sell Complete Chemical Plants and Process Equipment Worldwide. Louisiana Chemical Equipment Company has locations around the globe, which gives us the ability to acquire entire Complete Plants for relocation. If your looking for Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Complete Plant our sales team is here to help you.

Louisiana Chemical Equipment Company buys and sells complete chemical plants and process equipment on a worldwide. If you need Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Process Complete Plant, our team is here to help.

TRY OUR ADVANCED SEARCH FOR MORE DETAILS

FOLLOW US ONLINE

LOUISIANA CHEMICAL EQUIPMENT COMPANY
Real Experience, Real Solutions

+1-225-923-3602
sales@LCEC.com •
plants@LCEC.com

LCEC’s Home Facility in the Greater Baton Rouge Area • 7911 Wrenwood, Ste. A • Baton Rouge, LA, 70809 • Phone (225) 923-3602 • Fax: (225) 926-5237

LCEC in the Greater Houston Area • 11100 Hwy 225 • La Porte, TX, 77571 • Phone (281) 471-4900 • Fax (281) 470-2968

Hydrocracker Reactors

Hydrocracker Reactors

FEATURED COMPLETE CHEMICAL PLANTS

(2) Unused Hydrocracker Reators

(1) Unused Hydrocracker Reactor, 12’ID X 80’T-T (103’ overall length), 2755psig @ 850F, SA-336M F22V (Modified 2 1/4Cr-1Mo-V steel) w/TP317L Stainless Steel Weld Overlay, Built 2010 by Kobelco Steel Japan, ASME Code and National Board Registered (909), s/n 090053. Stored under Nitrogen Purge. All available data books, drawings & technical data is included. Reactor Internals are also available for an additional charge. Purchase and use of the internals and/or the Chevron Lummus Global (CLG) Technology called ISOMIX require the buyer to enter into a licensing agreement with CLG. Introduction to CLG provided upon request. Warehouse crates include, but are not limited to, top & bottom connecting pipes, anchor bolts, anchor bolt templates, and reactor internal components. Shipping saddles are included.

(1) Unused Hydrocracker Reactor, 11’ 11”ID X 56’ 7”T-T (80’ overall length), 2755psig @ 850F, SA-336M F22V (Modified 2 1/4Cr-1Mo-V steel) w/TP317L Stainless Steel Weld Overlay, Built 2010 by Kobelco Steel Japan, ASME Code and National Board Registered (910), s/n 100001. Stored under Nitrogen Purge. All available data books, drawings & technical data is included. Reactor Internals are also available for an additional charge. Purchase and use of the internals and/or the Chevron Lummus Global (CLG) Technology called ISOMIX require the buyer to enter into a licensing agreement with CLG. Introduction to CLG provided upon request. Warehouse crates include, but are not limited to, top & bottom connecting pipes, anchor bolts, anchor bolt templates, and reactor internal components. Shipping saddles are included.

Louisiana chemical equipment company

Real Experience, Real Solutions

LCEC’s personnel are qualified, experienced and eager to assist you.
+1-225-923-3602 • sales@LCEC.com • plants@LCEC.com

We buy and sell Complete Chemical Plants and Process Equipment Worldwide. Louisiana Chemical Equipment Company has locations around the globe, which gives us the ability to acquire entire Complete Plants for relocation. If your looking for Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Complete Plant our sales team is here to help you.

Louisiana Chemical Equipment Company buys and sells complete chemical plants and process equipment on a worldwide. If you need Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Process Complete Plant, our team is here to help.

TRY OUR ADVANCED SEARCH FOR MORE DETAILS